Vehicle electric forklifts need to be properly inspected and maintained during use. In addition, when the following situations occur, major repairs are required.
1. The steering of the battery forklift is not easy to use. At this time, the forklift has potential safety hazards and needs to be shut down for inspection and major repairs;
2. The door frame of the battery forklift shakes, and a major repair is needed at this time;
3. The stability of the electric forklift is reduced, and failures often occur during use;
4. The braking system of the battery forklift is not good, and there are hidden safety risks. At this time, it is necessary to shut down and perform major repairs;
5. The abnormal noise of the motor of the forklift indicates that the motor is malfunctioning and the motor bearing needs to be replaced;
6. The operating parts of the electric forklift have a large gap and the appearance is worn out, indicating that the service life of the forklift has been reached at this time;
7. The consumable parts of the battery forklift are close to or reach the end of their life. For example, when the electric forklift is driving, there are noises in the gantry, drive axle, steering axle, and inside the car body.
In short, when it is found that your vehicle electric forklift has the above-mentioned conditions, it is recommended not to continue working, but should stop, carefully check the forklift, record the failure, and carry out major repairs.
