Many users responded to electric forklift manufacturers: Occasionally encountered heavy forklift steering phenomenon, so what are the reasons for this failure phenomenon? In summary, there are several reasons.
1. The tie rod and steering axle are bent or deformed, or the tire pressure of the electric forklift is insufficient.
2. The adjustment of the ball head device of the horizontal and straight rods is too tight and needs to be loosened.
3. The upper and lower bearings of the steering screw of the electric forklift are adjusted too tight, or the forklift bearings are damaged.
4. Lubrication of steering device is not good, such as: need to add oil in steering machine. The ball joints are not lubricated in time, so that when they work, the friction resistance increases. Turn the lower steering wheel, if you feel relaxed, it means that the internal lubrication of the steering gear is good, then check whether the transmission mechanism is too tight, and the transmission mechanism is poorly lubricated. If you find any problems, you should adjust and lubricate in time.
5. The meshing gap between the rack and gear fan of the electric forklift is adjusted too tightly. When performing fault diagnosis and discharge, remove the steering gear rocker arm, and if the steering wheel feels heavy, adjust the progress of the rack, gear fan, and screw bearing. If you feel unevenness or internal seizures, check the screw, steel ball, catheter clamp, rack, and bearings for roughness or damage. If necessary, it is recommended to repair or replace it directly.
The above is the reason for the heavy steering of the forklift shared by the electric forklift manufacturers. It is recommended that when you encounter the problem of heavy steering of the forklift, you should start from the above aspects and conduct a one-by-one investigation to find the problem and solve it in time.
