The electric hydraulic forklift is designed for the transportation of goods in the warehouse. It has the advantages of simple operation and low maintenance cost. If you want to maintain a good running state for a long time, you must master the maintenance skills of the electric hydraulic forklift. The following electric forklift manufacturers will briefly summarize it for you.
1. When charging the battery, disconnect the charging circuit from the chopper, otherwise it will affect the charging of the charger, and the overvoltage generated by the charger will damage the chopper.
2. During the first test run, raise the wheels. This will ensure that even if there is a connection error, there will be no danger.
3. The wiring from the battery to the electronic control should be arranged in parallel, as short as possible.
4. Regularly clean the dust inside the DC motor of the electric hydraulic forklift, check the carbon brush and spring.
5. The battery is the core of the electric forklift, so distilled water (pure water) should be added frequently.
6. When the vehicle is operating in a place with bad working conditions and difficult ventilation, the controller is forced to ventilate.
7. When the electric forklift is not used for a long time, leave the battery fully charged and keep it charged once every 1 to 2 months.
8. When operating the electric hydraulic forklift, the driver should try to avoid some unsafe operations, such as: do not slow down when turning, drive when the load is increased, overload the forklift, and drive on a sloping, soft ground.
The above is the maintenance skills of electric hydraulic forklifts summarized by electric forklift manufacturers. In daily work, not only must you master the operation skills, but also keep in mind the skills of some daily maintenance methods.
