Doing good maintenance and maintenance of electric stacker trucks can effectively improve work efficiency and greatly liberate manpower. Here is a brief introduction to electric forklift manufacturers:
(1) Cleanliness and sanitation of the use site.
(2) When servicing, please take off your watches, earrings or other ornaments, and do not bring loose or valuable items on your body to avoid falling into the electric stacker. Especially when repairing the electrical system of the electric stacker, if the metal contacts the energized electronic components, it is easy to cause short circuit or burning.
(3) Before maintenance, unplug the power socket of the electric stacker and disconnect the power supply.
(4) Before opening the cover or electrical system, turn off the key switch of the forklift.
(5) Before checking the hydraulic system, the fork should be lowered and the system pressure should be released.
(6) Check the oil leakage of the car body, wipe it with paper or cardboard, and do not touch it directly with your hands to avoid burns.
(7) Before changing gear oil or hydraulic oil, let the electric stacker truck cool down first, because the oil temperature in the transmission or hydraulic system may be higher to prevent the high oil temperature from causing combustion.
(8) Store and discharge oil according to regulations, and do not discharge it to sewer pipes casually.
(9) When welding the car body, disconnect the battery power supply. Otherwise, the welding current may enter the battery during welding, so it is important to cut off the battery.
(10) If working under the stacker truck, the electric stacker truck should be supported by a bracket. Improper support, the electric stacker will tip over and hurt people.
(11) Fill the hydraulic system with new cleaning oil. If the hydraulic oil is not clean or hydraulic oil of different brands is used, it will affect the precision hydraulic components and reduce the capacity of the entire hydraulic system. It is recommended to use uniform grade hydraulic oil.
The above is the maintenance and maintenance method of the electric stacker. Doing a good job in maintenance can not only improve the logistics handling efficiency, but also effectively extend the service life of the product.
